£591.60 Inc VAT Excl Tax: £493.00

The floor 880 comes with all parts shown

1 x floor 880 motor with 2m of 4 core cable attached

1 x bottom boss (spline collar / spline coupling )

2 x washers

2 x nuts 19mm

1 x 10uf capacitor

1 x manual release key size 6

1 x manual

16KG 450MM 250MM 200MM

Unlike other hydraulic underground motors the oil is for the life of the Gibidi Floor underground motors and you don't have to change or top up the oil every 2 - 4 years! Like you DO with SEA & BFT hydraulic underground motors

No Such thing as a direct replacement for a Gibidi Floor motor That isn't Gibidi!

Have a look at how to replace an older floor 810 or floor 830 motor for the new motor follow link
https://www.gibidimotors.co.uk/gibidi-floor-810-812-824-830-850-854-880-884

Floor 810 & Floor 830 Are Now Discontinued & Replaced With New Gibidi Floor 880

https://www.gibidimotors.co.uk/store/product/gibidi-floor-880-bac-230v-180

Gibidi Floor 830 Hydraulic Motor - Replacement For The Older Foor 810 Hydraulic With

180° Rotation (Gate Leafs Upto 3.0 m) 81300

Gibidi Floor 880 BAC 230V 180°
GROUND
allows practically invisible automation of swing gates. The automated device consists of an
electromechanical underground operator in both 24 VDC and 230 VAC version, able to transmit
motion to leafs of up to 3.5 m
Gibidi-floor 850-854-880-884

The new FLOOR are all compatible with the old FLOOR 830-810 and MODO 810 series.

floor 830
https://www.gibidimotors.co.uk/store/product/gibidi-floor-830-hydraulic-gate-motor-81300

Call the office 01773 719347  Yes We Have Stock!

If you now need a floor 830 we can offer the NEW Gibidi floor 880 it is the same size and shape with same wiring as the older now discontinued floor 830


The new range has been designed with the aim of further improvements over the already high quality of previous models. Here you are the main improvements:

• Increased the size of the internal rack
• Double protection inserted around the transmission shaft
• New bronze guide ring for the transmission shaft
• Increased bearing robustness
• Inserted a thrust bearing on the transmission shaft
• New anchor system for the gearbox bushing
• New anchor system for the hydraulic power unit and the jack for greater resistance.

We recommend changing the bronze bearing and top boss when changing an old motor for a new motor
The correct bottom spline (bottom boss) comes with all new Floor motors from us (GiBiDi Coupling Splined )

https://www.gibidimotors.co.uk/store/product/boss-kit-for-all-floor-motors-inc-bearing-top-boss

4576000/5491200