Payment
PAYMENT IS ACCEPTED VIA PAYPAL, DEBIT/CREDIT CARD OR CALL US AND PAY VIA TELEPHONE
Office 01773 719347 Sales from 9 to 5
Adrian 07971 475781
gibidi@gibidiautomation.co.uk
1 x AU03150 Gibidi Mako Black Remote Key Fob 433 MHz
£40.80 incl. tax*
MAKO FOB AU03150 BLACK
Category
Gibidi Fobs, Keys & Locks
Tags
AU0300
AU03000
AU04000
AUO1600
Black AU03150
fob
Gibidi
mako
White AU03100
MAKO: the new way of using the most advanced technology.
For 1 x MAKO AU03100 (WHITE) Or AU03150 (BLACK) remote fob £40.80 Inc VAT Excl Tax: £34.00
Gibidi Mako Black OR White Remote Key Fob 433 MHz
Black AU03150
Remote control
A new concept of elegance. The new GIBIDI transmitter to open the doors of your future.
Smart lines, ergonomic buttons easy to use, signalling LED and a hooking for the key ring directly inserted in the die-cast aluminium structure. The casing is produced from the most modern techno-polymers providing protection to the GIBIDI equipment inside.
Innovative electronics made with the highest technologic standards to always grant reliability, safety and signal power, thanks to the HPA system (High Protection Algorithm)!
Available also with MANAGER electronics for an evolved management of the access, that cannot be cloned! MAKO with MANAGER, the safety binomial.
MAKO: the new way of using the most advanced technology.
Smart lines, ergonomic buttons easy to use, signalling LED and a hooking for the key ring directly inserted in the die-cast aluminium structure. The casing is produced from the most modern techno-polymers providing protection to the GIBIDI equipment inside.
Innovative electronics made with the highest technologic standards to always grant reliability, safety and signal power, thanks to the HPA system (High Protection Algorithm)!
Available also with MANAGER electronics for an evolved management of the access, that cannot be cloned! MAKO with MANAGER, the safety binomial.
MAKO: the new way of using the most advanced technology.
Specifications
| Fashion model | AU03100 (Black) - AU03150 (White) |
|---|---|
| Carrier frequency | 433,920 MHz. |
| Modulation | Digital 00K (on / off keying) |
| Power consumption | 10 mA |
| Radiated carrier wave | <1mW |
| Operating temperature | -20 ° C + 55 ° C |
| Battery | 1 x CR2032 |
Thank you for choosing GI.BI.DI.
Use: When pressing and releasing one of the keys the code will be transmitted on the relevant channel. Learning codes: position close to the radio receiver and press simultaneously, for at least 6 s, the buttons 1 and 2 of a transmitter already stored. Then press the button of the new transmitter. Code learning only with receiver AU02820 - AU02920/30: simultaneously press the keys 1 and 2 of a transmitter already stored; the LED's of the receiver and transmitter will start blinking fast and slow down after 5-6 seconds, the receiver goes into pre-learning mode. Within 2-3 seconds press the key associated with the receiver to be set to learning mode. Press any key of the new transmitter which will be stored with the standard channels assigned.
https://www.gibidimotors.co.uk/old-and-new-receiver-units-inc-programming
| Follow link for programming Gibidi 433 video https://vimeo.com/178172262 or https://vimeo.com/180154676 GiBiDi Domino Remote Transmitter Fob Configuring Additional Remote Transmitter Fobs Additional transmitter fobs can be configured to work with the existing installation. In order to do this you need to be standing in front of the control box by the gates. (A) USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...Press buttons 1 and 2 together at the same time for 8 continuous seconds. Then within five seconds... Briefly press the button 1 on the new remote transmitter fob. Leave the system for 10 seconds. Press the button on the newly configured transmitter fob and the gates should open. Do not press the Radio Transmitter Fob Button without seeing that the gate is clear of obstructions.
OR (B)
To program a genuine Domino remote USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...You can do this by going to the control panel of
(1)Sliding gates Take the lid off the motor so you can see control panel and see through cover Then undo the screw by you at the end of the control panel by wiring then loosen the 2 screws at the far end away from the wiring to lever the see through lid up away from the wiring then at the far end away from the wiring there is a pcb card sticking up with a RED L.E.D and BUTTON by it ….
(2) Swing gates go to the control panel remove the lid and on right hand side ½ way up there is a PCB card sticking out with a RED L.E.D and BUTTON by it
Press button briefly until red L.E.D comes on then press ONLY BUTTON 1 on remote….
THAT’S IT PROGRAMMED! THEN REPEAT FOR MORE REMOTES… If red L.E.D goes out press button again and repeat with other non-programmed remotes.
THIS PROGRAMS ALL 4 BUTTONS …. ONLY EVER PRESS BRIEFLY BUTTON 1 ON REMOTE FOR PROGRAMMING!
Don’t worry if you use buttons 2,3 or 4 as by pressing briefly button 1 this programmes all 4 buttons If you have 2 button Gibidi remote follow the instructions but you can press the button you want to work the gates!
Don’t Press the receiver card button in for more than 5 seconds as this could delete all programmed remotes already programmed into it! Clearing the receiver card memory (necessary if a handset has been lost or stolen) Locate the programming button on the receiver/control PCB. Press this button briefly then press a second time and hold it down until the L.E.D goes out then follow steps (A) or (b) above to re-program key fobs again Also by trying to program copy remotes this could stop genuine remotes from working OR Delete all other programmed remotes from the receiver unit
Regular Maintenance by User The Radio Transmitter Fob is battery powered. As the battery life diminishes, the range of transmission will decrease. When the red L.E.D. does not light up, you should change your battery…. If you have problems you can give us a call at Gibidi automation on 01773719347 We Sock Spare Gibidi Parts & Full Gate Automation Kits Above Ground & Under Ground Motors For Swing Twin Leaf & Single Leaf Gates As Well As Sliding Gate Motors & Barrier / Bollard Motors of various sizes |
Mako FobCall the office 01773 719347
https://www.gibidimotors.co.uk/old-and-new-receiver-units-inc-programming
* Based on residence in United Kingdom. Tax rates for other countries will be calculated at the checkout. Price exclusive of tax: £34.00.
