1 x AU0300 Gibidi Domino Transmitter Gibidi Remote 4 Button
£18.33
DOMINO FOB AUO300
For 1 x Domino AUO300 remote fob £22.00 Inc VAT
Excl Tax: £18.33
NEW LOW PRICE!
1 = £22.00 each £18.33 + vat = £22.00
2 = £21.50 each £35.83 + vat = £43.00
3 = £21.50 each £53.75 + vat = £64.50
4 = £20.00 each £66.67 + vat = £80.00
6 = £19.50 each £97.50 + vat = £117.00
8 = £19.00 each £126.67 + vat = £152.00
10 = £18.50 each £154.17 + vat = £185.00
15 = £18.25 each £228.12 + vat = £273.75
20 = £18.00 each £300.00 + vat = £360.00
40 = £17.50 each £583.33 + vat = £700.00
https://www.gibidimotors.co.uk/store/product/a-gibidi-mako-black-or-white-remote-key-fob-433-mhz
Now we have new covers in white green and red CODE AU04000 follow link
https://www.gibidimotors.co.uk/store/product/gibidi-blister-accessory-set-of-3-coloured-covers-au040...
Domino transmitter Gibidi remote 4 button 4-Channel Transmitter ( 433Mhz )
TO PROGRAM THE REMOTE JUST GIVE US A CALL AND WE CAN TALK YOU THROUGH PROGRAMMING!!!
Dominates any type of system with the ease of a simple gesture that touches an object of high design. DOMINO is reliable and user-friendly with its ergonomic small (but not too small) buttons. You can attach it to your key ring or secure it in your car using the fastening system included in the blister pack.
With the nifty accessories you can personalise your remote control in your favourite colour, in fact, the covers are easily interchangeable in just a few seconds.
DOMINO: the modern way of using the most advanced safety devices.
GBD
 | 4 -Channel transmitter rolling code in a blister pack including key-ring AU03000 AU03000 AU04000 AU0300 AU0400 Follow link for programming Gibidi 433 video https://vimeo.com/178172262 or https://vimeo.com/180154676 GiBiDi Domino Remote Transmitter Fob Configuring Additional Remote Transmitter Fobs Additional transmitter fobs can be configured to work with the existing installation. In order to do this you need to be standing in front of the control box by the gates. (A) USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...Press buttons 1 and 2 together at the same time for 8 continuous seconds. Then within five seconds... Briefly press the button 1 on the new remote transmitter fob. Leave the system for 10 seconds. Press the button on the newly configured transmitter fob and the gates should open. Do not press the Radio Transmitter Fob Button without seeing that the gate is clear of obstructions.
OR (B)
To program a genuine Domino remote USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...You can do this by going to the control panel of
(1)Sliding gates Take the lid off the motor so you can see control panel and see through cover Then undo the screw by you at the end of the control panel by wiring then loosen the 2 screws at the far end away from the wiring to lever the see through lid up away from the wiring then at the far end away from the wiring there is a pcb card sticking up with a RED L.E.D and BUTTON by it ….
(2) Swing gates go to the control panel remove the lid and on right hand side ½ way up there is a PCB card sticking out with a RED L.E.D and BUTTON by it
Press button briefly until red L.E.D comes on then press ONLY BUTTON 1 on remote….
THAT’S IT PROGRAMMED! THEN REPEAT FOR MORE REMOTES… If red L.E.D goes out press button again and repeat with other non-programmed remotes.
THIS PROGRAMS ALL 4 BUTTONS …. ONLY EVER PRESS BRIEFLY BUTTON 1 ON REMOTE FOR PROGRAMMING!
Don’t worry if you use buttons 2,3 or 4 as by pressing briefly button 1 this programmes all 4 buttons If you have 2 button Gibidi remote follow the instructions but you can press the button you want to work the gates!
Don’t Press the receiver card button in for more than 5 seconds as this could delete all programmed remotes already programmed into it! Clearing the receiver card memory (necessary if a handset has been lost or stolen) Locate the programming button on the receiver/control PCB. Press this button briefly then press a second time and hold it down until the L.E.D goes out then follow steps (A) or (b) above to re-program key fobs again Also by trying to program copy remotes this could stop genuine remotes from working OR Delete all other programmed remotes from the receiver unit
Regular Maintenance by User The Radio Transmitter Fob is battery powered. As the battery life diminishes, the range of transmission will decrease. When the red L.E.D. does not light up, you should change your battery…. If you have problems you can give us a call at Gibidi automation on 01773 719347 We Stock Spare Gibidi Parts & Full Gate Automation Kits Above Ground & Under Ground Motors For Swing Twin Leaf & Single Leaf Gates As Well As Sliding Gate Motors & Barrier / Bollard Motors of various sizes |
https://www.gibidimotors.co.uk/store/product/a-gibidi-mako-black-or-white-remote-key-fob-433-mhzCall the office 01773 719347
