For 1 x MAKO AU03100 (WHITE) Or AU03150 (BLACK) remote fob £24.00 Inc VAT

Excl Tax: £20.00

NEW LOW PRICE!

1 = £24.00 each £20.00 + vat = £24.00  
2 = £ 23.50 each £39.17 + vat = £ 47.00
3 = £23.50 each £58.75 + vat = £70.50
4 = £ 22.00 each £73.33 + vat = £88.00
6 = £ 21.50 each £107.50 + vat = £129.00
8 = £21.00 each  £140.00 + vat = £ 168.00
10 = £20.50 each £170.83+ vat = £205.00
15 = £20.25 each £253.12 + vat = £303.75
20 = £20.00 each £333.33 + vat = £400.00
40 = £19.50 each £650.00 + vat = £780.00

Gibidi Mako Black OR White Remote Key Fob 433 MHz
White AU03100

Remote control

Specifications

Thank you for choosing GI.BI.DI.

Use: When pressing and releasing one of the keys the code will be transmitted on the relevant channel. Learning codes: position close to the radio receiver and press simultaneously, for at least 6 s, the buttons 1 and 2 of a transmitter already stored. Then press the button of the new transmitter. Code learning only with receiver AU02820 - AU02920/30: simultaneously press the keys 1 and 2 of a transmitter already stored; the LED's of the receiver and transmitter will start blinking fast and slow down after 5-6 seconds, the receiver goes into pre-learning mode. Within 2-3 seconds press the key associated with the receiver to be set to learning mode. Press any key of the new transmitter which will be stored with the standard channels assigned.

https://www.gibidimotors.co.uk/old-and-new-receiver-units-inc-programming

GiBiDi  Domino

Remote Transmitter Fob

Configuring Additional Remote Transmitter Fobs

Additional transmitter fobs can be configured to work with

the existing installation.

In order to do this you need to be standing in front of the control box by the gates.

(A)

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...Press buttons 1 and 2 together at the same time for 8 continuous seconds.

Then within five seconds...

Briefly press the button 1 on the new remote transmitter fob.

Leave the system for 10 seconds.

Press the button on the newly configured

transmitter fob and the gates should open.

Do not press the

Radio Transmitter Fob Button without seeing that the gate is

clear of obstructions.

OR (B)

To program a genuine Domino remote

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...You can do this by going to the control panel of

(1)Sliding gates Take the lid off the motor so you can see control panel and see through cover Then undo the screw by you at the end of the control panel by wiring then loosen the 2 screws at the far end away from the wiring to lever the see through lid up away from the wiring then at the far end away from the wiring there is a pcb card sticking up with a RED L.E.D and BUTTON by it ….

(2) Swing gates go to the control panel remove the lid and on right hand side ½ way up there is a PCB card sticking out with a RED L.E.D and BUTTON by it

Press button briefly until red L.E.D comes on then press ONLY BUTTON 1 on remote….

THAT’S IT PROGRAMMED! THEN REPEAT FOR MORE REMOTES…

If red L.E.D goes out press button again and repeat with other non-programmed remotes.

THIS PROGRAMS ALL 4 BUTTONS …. ONLY EVER PRESS BRIEFLY BUTTON 1 ON REMOTE FOR PROGRAMMING!

Don’t worry if you use buttons 2,3 or 4 as by pressing briefly button 1 this programmes all 4 buttons

If you have 2 button Gibidi remote follow the instructions but you can press the button you want to work the gates!

Don’t Press the receiver card button in for more than 5 seconds as this could delete all programmed remotes already programmed into it!

Clearing the receiver card memory

(necessary if a handset has been lost or stolen)

Locate the programming button on the receiver/control PCB. Press this button briefly then press a second time

and hold it down until the L.E.D goes out then follow steps (A) or (b) above to re-program key fobs again

Also by trying to program copy remotes this could stop genuine remotes from working

OR

 Delete all other programmed remotes from the receiver unit

Regular Maintenance by User

The Radio Transmitter Fob is battery powered. As the battery life diminishes, the range of transmission will decrease. When the red L.E.D. does not light up, you

should change your battery….

If you have problems you can give us a call at Gibidi automation on

01773719347

We Sock Spare Gibidi Parts & Full Gate Automation Kits Above Ground & Under Ground Motors For Swing Twin Leaf & Single Leaf Gates As Well As Sliding Gate Motors & Barrier / Bollard Motors of various sizes