£998.40 Inc VAT Excl Tax: £832.00
NO FLOOR 830'S In Stock ONLY FLOOR 880'S / FLOOR 850'S
Unlike other hydraulic underground motors the oil is for the life of the Gibidi Floor underground motors and you don't have to change or top up the oil every 2 - 4 years! Like you DO with SEA & BFT hydraulic underground motors
No Such thing as a direct replacement for a Gibidi Floor motor That isn't Gibidi!https://www.gibidimotors.co.uk/gibidi-floor-810-812-824-830-850-854-880-884
Floor 810 & Floor 830 Are Now Discontinued & Replaced With New Gibidi Floor 880
Gibidi Floor 830 Hydraulic Motor - Replacement For The Older Floor 810 Hydraulic With
180° Rotation (Gate Leafs Upto 3.0 m) 81300
This product is the new hydraulic operator to replace the FLOOR810. This will fit into all old foundation boxes however a small cut is required in the each of the 2 main back supports to accommodate the extra cylinder tie rods.
Changes include the following :
2 extra rack bushes for extra rack & pinion stability
2 extra tie rods per cylinder to retain cylinder heads
tempered steel drive shaft
hardened drive shaft collar
rotation increased to 180 degree with longer cylinders
can be set to non locking on board ( no need to spec non locking when ordering )
Underground hydraulic operator for swing gates
FLOOR, available either in the 230Vac (FLOOR830) or 24Vdc (FLOOR824), is installed underground so that it is invisible and does not alter the gate aesthetics. For every model you have only one version that allows opening the leaf up to 180°.
The new GIBIDI technology allows making the operator reversible or irreversible with a little few manoeuvres.
The overpressure valves for force regulation during opening and closing, and the 24Vdc technology, allow achieving the highest level of safety against crushing, as required by the EN 12453 standards.
You can also adjust the opening and closing speed, and use the Hall effect limit switches (optional).
The unlocking device for emergency manoeuvres in the event of a blackout is easy to access and can be used either on the inside or outside of the gate.
The foundation box, with self-lubricating bushing is fully self-supporting and allows installing the operator without having to remove the leaf from the gate.
GIBIDI - Creative Automation
Now on sale ....
Unlike other hydraulic underground motors the oil is for the life of the motor and you don't have to change the oil every 2 years!
we recommend changing the bronze bearing and welded top boss when swapping out an old motor for new as the 2 parts will also be well worn
Category Gibidi Underground Motor's