REPUBLIC Of IRELAND CALL US IF YOU HAVE A VAT NUMBER FOR NETT PRICES OR

SEND US A LETTERHEAD WITH A VALID VAT NUMBER

2 X Gibidi new round 2 button remote fob AUD4500

£33.33

Gibidi new round 2 button remote fob AUD4500

AUD4500 Gibidi New Round 2 Button Remote Fob

Works the same and programs the same as the Domino and the 2 button AU01600 fobs just smaller

2 x £33.33 + vat total inc tax and postage to UK post code £40.00
4 x £65.83 + vat total inc tax and postage to UK post code £79.00
8 x £130.00 + vat total inc tax and postage to UK post code £156.00

TO PROGRAM THE REMOTE JUST GIVE US A CALL AND WE CAN TALK YOU THROUGH PROGRAMMING!!!



Follow link for programming gibidi 433 video
https://vimeo.com/178172262
or
https://vimeo.com/180154676

GiBiDi  AUD4500

Remote Transmitter Fob

Configuring Additional Remote Transmitter Fobs

Additional transmitter fobs can be configured to work with

the existing installation.

In order to do this you need to be standing in front of the control box

by the gates.

(A)

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...Press buttons 1 and 2 together at the same time for 8 continuous seconds.

Then within five seconds...

Briefly press the button 1 on the new remote transmitter fob.

Leave the system for 10 seconds.

Press the button on the newly configured

transmitter fob and the gates should open.

Do not press the

Radio Transmitter Fob Button without seeing that the gate is

clear of obstructions.

 

OR (B)

 

To program a genuine Domino remote

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...You can do this by going to the control panel of

 

(1)Sliding gates Take the lid off the motor so you can see control panel and see through cover Then undo the screw by you at the end of the control panel by wiring then loosen the 2 screws at the far end away from the wiring to lever the see through lid up away from the wiring then at the far end away from the wiring there is a pcb card sticking up with a RED L.E.D and BUTTON by it ….

 

(2) Swing gates go to the control panel remove the lid and on right hand side ½ way up there is a PCB card sticking out with a RED L.E.D and BUTTON by it

 

Press button briefly until red L.E.D comes on then press ONLY BUTTON 1 on remote….

 

THAT’S IT PROGRAMMED! THEN REPEAT FOR MORE REMOTES…

If red L.E.D goes out press button again and repeat with other non-programmed remotes.

 

THIS PROGRAMS ALL 4 BUTTONS …. ONLY EVER PRESS BRIEFLY BUTTON 1 ON REMOTE FOR PROGRAMMING!

 

Don’t worry if you use buttons 2,3 or 4 as by pressing briefly button 1 this programmes all 4 buttons

If you have 2 button Gibidi remote follow the instructions but you can press the button you want to work the gates!

 

Don’t Press the receiver card button in for more than 5 seconds as this could delete all programmed remotes already programmed into it!

Clearing the receiver card memory

(necessary if a handset has been lost or stolen)

Locate the programming button on the receiver/control PCB. Press this button briefly then press a second time

and hold it down until the L.E.D goes out then follow steps (A) or (b) above to re-program key fobs again

Also by trying to program copy remotes this could stop genuine remotes from working

OR

 Delete all other programmed remotes from the receiver unit

 

Regular Maintenance by User

The Radio Transmitter Fob is battery powered. As the battery life diminishes, the range of transmission will decrease. When the red L.E.D. does not light up, you

should change your battery….

If you have problems you can give us a call at Gibidi automation on 01773 719347

We Sock Spare Gibidi Parts & Full Gate Automation Kits Above Ground & Under Ground Motors For Swing Twin Leaf & Single Leaf Gates As Well As Sliding Gate Motors & Barrier / Bollard Motors of various sizes




Product Options

Payment

PAYMENT IS ACCEPTED VIA PAYPAL,  DEBIT/CREDIT CARD OR CALL US AND PAY VIA TELEPHONE 

Office 01773 719347 Sales from 9 to 5  

Adrian 07971 475781 

gibidi@arsparks.co.uk

All Post To Mainland UK included in the price

If you are in the UK the price you see is all you pay as we don't add shipping at checkout.... 

Screenshot 2019-02-24 at 110135png

Don't know the parts you need text, email or whatsapp a picture to Adrian on 07971475781 or email mail@arsparks.co.uk with a picture of the broken part or a picture from the back of your gates with a description of the problem and we will do what we can to help

2019 Copyright A T Ball Electrics All Rights Reserved

gibidi@arsparks.co.uk

  Office 01773 719 347          
      Adrian 07971 475 781

 

Head office:-The Old Bake House Office 31 Moorgreen Newthorpe Nottingham NG162FD

VAT Registration Number is 230 5806 33

PLEASE NOTE : ITEMS WILL NOT BE LEFT BY COURIER (DPD) WITHOUT BEING SIGNED FOR.

Most small items are sent by post and we are unable to instruct the postman to leave Items.